NXTGEN EasyFlow Mask®


Medical Grade Elastomeric Respirator

The rapid global spread of COVID-19 has sparked unprecedented cross-disciplinary research. Contributions from the fields of engineering, life science, aerosol science, medicine, occupational hygiene and epidemiology are driving a paradigm shift in our understanding of aerosol transmission of respiratory viruses, including COVID-19.
The acknowledgement of aerosol transmission also calls into question the  directives for personal protective equipment for health care workers and other essential workers. We created our unique elastomeric respirators in March of 2020 to ensure that that no high-risk health care worker, essential workers or immunocompromised individuals are denied access to a respirator (N95, elastomeric or equivalent) that will pass a qualitative fit-test. This is especially important with more infectious mutations, which are thought to be 50-70 percent more transmissible.

Designed for healthcare professionals, available to the public

NXTGEN EasyFlow Mask

Face Masks

Face Masks


Replaceable Medical Grade Electrostatic Filters 

Important Note Regarding Our Filters: The electrostatic filters used in our masks are genuine medical grade filter media. This material is intended for bacterial and viral filtration and lab tested for efficacy

Our incredible filters are a tribo-electret media and have unique charged characteristics. These filters have passed stringent biocompatibility requirements set by the FDA and have proven to be highly efficient in terms of protection against viruses and bacteria. The benchmark testing done at Nelson Labs of the raw filter material has resulted in obtaining up to 99.99% efficiencies against the transmission of these harmful bacteria and viruses in a laboratory setting.

These are particulate filters and are not suitable for use with toxic gases or vapors. These filters should be replaced:

  • When heavily soiled or damaged
  • Increased breathing resistance occurs
  • They have been used for 40 hours or 30 days

Replacement filter sets are available for purchase to keep your model F0230 mask functioning at peak performance.

Our unique mask is much easier to breathe in compared to other N95 or P100 half face respirators.

Our Filter Media is Made in The USA

We purchase in bulk and custom die-cut


Quick And Easy Cleaning 


One of the many great features of the EasyFlow Mask™ is the ability to quickly clean as often as needed.

The F0230 mask may be cleaned by:

  • Alcohol
  • UV Sterilization
  • Disinfecting Wipes
  • Warm Soapy Water
  • Hydrogen Peroxide
  • Steam


Freedom | Flexibility | Safety 

 

NXTGEN EasyFlow Mask™ Benefits:

  • REUSABLE NOT DISPOSABLE: Injection molded using medical grade impact copolymer and silicone. Quickly and easily sanitize as often as needed without laundering. 

 

  • REAL MEDICAL FILTER MEDIA: The finest name brand medical grade filters. These electrostatic filters are designed and approved for bacterial and viral protection. They provide 99.9% filtration of viruses and bacteria, and will not muffle the voice or fog up glasses with proper fit and seal. 

 

  • COST-EFFECTIVE TO USE: Each mask set includes (5) medical grade electrostatic filters that can be used for approximately 40 hours or 30 days of use per filter. Replacement filter sets are also available for purchase.

 

  • EXTREMELY FLEXIBLE: The adjustable straps and silicone face gasket enable one size to fit most. Small faces can wear under the chin, medium faces on the chin and larger faces can wear above the chin. Our single model has a uniquely designed frame that can be vented or not depending upon the users’ needs. 

 

  • HIGHLY BREATHABLE: The NXTGEN EasyFlow Mask™ features robust sub-micron filtration and incredible breathability. Our unique design has been widely used by frontline healthcare providers, businesses and the general public. These attributes make our NXTGEN mask a useful tool for all households far beyond the pandemic.


Filtered or Unfiltered Exhalation Valve

Our unique mask design is highly adaptable for various uses. While most respirator manufacturers have multiple models, both valved and non-valved, we have one flexible model that can be changed based on the users’ needs. Moisture can degrade the electrostatic filters efficiency. For those working outdoors, engaging in rigorous physical activity or wearing for long periods of time, a moisture exhalation valve has been built into the frame. For occupations or usage where an exhalation valve is not suitable, the valve can be completely filtered. To filter the exhalation valve and seal it off, simply cut a piece of filter and place it over the ridge on the outer frame. This plastic ring on the outer frame is just slightly smaller than the filter hole, and will punch the extra piece into the filter hole like a snap and seal it off. We also have replacement filters available without the moisture outlet hole.

 

Disposable Valved 3M Medical NIOSH / FDA Surgical N95

 

Disposable Non-Valved 3M Medical NIOSH / FDA Surgical N95

NXTGEN EasyFlow™ is Fully Adaptable With One Mask Model

NXTGEN EasyFlow Mask

NXTGEN EasyFlow Mask


Flexible Facial Placement

The NXTGEN EasyFlowMask™ is a one size fits most respirator. The unique gasket design allows users 1-2 inches of vertical adjustability in regard to facial placement. Small faces may tuck the chin fully inside the gasket, while medium faces can wear on the chin. Those with larger faces can wear above the chin but below the mouth.

NXTGEN EasyFlow MaskNXTGEN EasyFlow Mask


Designed For Medical PPE and Procedures 

A Product Designed During The Pandemic
Before the CDC recommended mask wearing for the general public and amid terrible PPE shortages for frontline healthcare providers, NXTGEN quickly sprang into action. The heart of our EasyFlow Masks™ is the incredible medical grade filter media.
Our unique, shallow design can be sanitized quickly, as often as needed, and allows the use of other PPE and medical equipment. For clinicians treating COVID patients, the ability to stack multiple layers of PPE helps keep them safer. Compared to the 3M 7093 or similar half face P100 respirators, the EasyFlow Mask™ better accommodates hoods, shields, goggles and similar devices. The dual frame design also creates an incredibly flexible respirator, which can be customized in many ways.
Valved and non-valved filters can be used depending upon the scope of work being done. Compared to traditional respirators, our design can easily have full valve filtration and surgical masks can simply be layered internally, or worn over our respirator for added liquid resistance.
Used and Recommended By Frontline Healthcare Workers Worldwide


Independent Laboratory Tested

Adapting To The New Normal

In addition to healthcare professionals worldwide, the NXTGEN EasyFlow Mask™ has been widely adopted by the general public. This is due to its combination of robust filtration and unparalleled breathability. During these uncertain times, the NXTGEN EasyFlow Mask™ provides freedom, flexibility and safety. Unlike traditional high-filtration respirators, it is even breathable enough to be comfortably used for:

Fitness & Workouts

NXTGEN EasyFlow Mask

Travel, Leisure & Work

NXTGEN EasyFlow Mask

NXTGEN EasyFlow Mask

Fashionable & Customizable 

NXTGEN EasyFlow Mask


*Disclaimer: The individual components of the F0230 mask have been independently lab tested to meet stringent FDA & NIOSH standards when used in other devices. As a brand new product, this mask has not yet been evaluated or approved by the FDA or NIOSH. This product is not currently an FDA approved medical device. Full filtration is dependent upon proper fit, seal and use. Clinical use is typically subject to a NIOSH fit test and our product will pass a hooded fit test with proper fitment.  The NXTGEN EasyFlow™ Mask has been 3rd party tested by Nelson Labs and was found to filter 99.9% of viruses and bacteria with proper fit and seal. This testing was done in accordance with FDA and EN standards.


Please Note: Mask products, accessories and filter sets are not returnable or refundable once fulfilled. For safety reasons, we cannot accept returned items whatsoever. This is in compliance with sate and federal law during the COVID-19 pandemic. 


Purchase Now Free Priority USA Shipping including AK & HI

Canada Shipping is $12-$25 USD 

European DHL Express $35 USD

All international shipments are subject to additional import fees & taxes, which are separate from shipping fees and collected from the receiver.

New Year’s 10% Off Mask Sale!!  

 

Please select mask  sets by size and with or without valve hole

View 10 25 50 Showing 1-10 of 20 Results
View Cart Product successfully added to your cart.
1
2